Axis firmware release notes 9 Preceding release: 1. 9 Preceding release: 6. 2 ----- FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8004-VE Release date: 2022-05-31 Release type: Production Firmware version: 1. Firmware release notes contain materi al for all minor revisions subsequent to each major revision. 35 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management 2. 50 FIRMWARE RELEASE NOTE ===== Products affected: AXIS A1610 Release date: 2024-09-30 Release type: Production Firmware version: 11. Restrictions This section describes restrictions in this and previous revisions. 2 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS FIRMWARE RELEASE NOTE ===== Products affected: P3224-V MK II/-VE MK II/P3225-V MK II/-VE MK II Release date: 2022-05-06 Release type: Production Firmware version: 8. Please follow Release Notes Kinetix 6000 Multi-axis Servo Drives; 2094-BCxx; 2094-BMxx; 2094-ACxx; 2094-AMxx; Version 1. com/support/firmware. FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q1765 Release date: 2023-08-09 Release type: Production Firmware version: 6. 0, HTTP or FTP. 01. 1784-PM16SE Introduction This release note corresponds to revision 13. 6 File name: P8221_5_10_6. Never Downgrade/roll back your firmware without a full factory default of your product. 20 File name: P1311. Sends Axis to System as well as slaves if Controller. 0 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS Upgrade the firmware according to the instructions given in howtoupgrade. 1 File name: axis241S. bin This page contains firmware update notes for the KICKR MOVE which features fore-aft movement, Wi-Fi, and AXIS feet for improved compliance. Start the application if it is not already running. 6 FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q1765-LE Release date: 2023-02-02 Release type: Production Firmware version: 6. 7 Version 1. 41. 3 (LTS 2020) and onwards. So, 70:1 wheels gear plus 100º/s Remote Rate Scale will be a total of 140:1 wheels to axis ratio. 0 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired FIRMWARE RELEASE NOTE ====================== Products affected: AXIS M3025-VE Network Camera Release date: 2020-12-03 Release type: Production Firmware version: 5. ¶ Added a QR code link to the firmware version page to view previous release notes. 2 File name: M1011-W_5_20. 11. x will be improved in FW 5. Following products . To get the latest updates to your RSS feed, subscribe to the product firmware feed. bin Preceding FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8004-VE Release date: 2018-04-23 Release type: Production Firmware version: 1. 54. 6 ----- This is the LTS-2018 track. 11 The 'unload' button on the 'Temperature/Axis' tab for unloading the filament of the spool holder has been removed. FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q3708-PVE Release date: 2021-10-25 Release type: Production Firmware version: 6. 4 Archive - AXIS OS Release Notes AXIS OS 11 AXIS OS 11 Inthissection,youcanfindreleasenotesontheactivetrackpriortoAXISOS12. Follow the instructions given in the User Manual, at http Summary. AXIS OS is the Linux-based operating system used in most of For highlights and detailed release notes on AXIS OS releases, visit AXIS OS Release Notes. It is planned that the product will only accept AXIS security-signed firmware starting in Q1/Q2 2019 and onwards. 056 Enhancements This section describes the new and updated firmware features provided in this and previous revisions. 1부터서명됩니다. 40. Table 1 - FIRMWARE RELEASE NOTE ===== Products affected: T8705 Release date: 2022-10-26 Release type: Production Firmware version: 6. Where to find product information. Axis works actively with the principles of openness and building trust FIRMWARE RELEASE NOTE ===== Products affected: AXIS A1601 Release date: 2020-12-03 Release type: Production Firmware version: 10. P1425-E/-LE P1427-E/-LE . By updating to the latest firmware release, we ensure that the listed products get new features and updates made since FIRMWARE RELEASE NOTE ===== Products affected: AXIS A1601 Release date: 2022-03-17 Release type: Production Firmware version: 1. AXIS OS is the Linux-based operating system used in most of your Axis network devices. AXIS Media Control displayed the following Product support for AXIS Camera Station S2212 Mk II Standalone Appliance. 1:F2 AXIS Motion Guard is now pre-installed. 3 Preceding FIRMWARE RELEASE NOTE ===== Products affected: P12 MK II Release date: 2022-04-26 Release type: Production Firmware version: 9. EBA now defaults to On if set to SL but not receiving SpeakerLink. 20. Search for specific features, open issues, and resolved issues using keywords in the search box. Audio. 2 FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8004-VE Release date: 2023-12-21 Release type: Production Firmware version: 1. 004 (released 3/2020) Catalog Number Kinetix 350 (2097-Vxxx) (series A) These release notes describe version information for Kinetix 350 (2097-Vxxx), version 2. 3 are now pre-installed. Rebranded from DM Bridge as HealthPro Bridge; NEW FUNCTIONALITY. 003 Features. 3 File name: P1405-LE-MkII_6_35_2_3. Please follow the FIRMWARE RELEASE NOTE ===== Products affected: AXIS P3343/44 Network Camera Release date: 2020-12-03 Release type: Production Firmware version: 5. 4 ----- Upgrade recommendations ===== Upgrade the firmware according to the instructions given in howtoupgrade. AXIS Auxiliary devices such as AXIS A1001, C3003-E, A9188, P8221. KICKR MOVE Firmware v1. 13 ----- This is the LTS-2020 track. If you encounter any issues when upgrading firmware - Contact Axis tech support. For more in-depth information about AXIS OS features and To update your AXIS with the latest release, click on the Download link and save the firmware file to your local device and review the release notes to get a glimpse of the new features and FIRMWARE RELEASE NOTE ===== Products affected: M3205-LVE / M3206-LVE Release date: 2021-04-28 Release type: Production Firmware version: 10. Please follow the instructions from the user Review the firmware release notes to learn more about the improvements that come with each version's release. 11 ----- This is the LTS-2016 track. FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8105-E Release date: 2023-07-27 Release type: Production Firmware version: 1. Add the overlay text: Go to Settings > Overlay. 0 Onvif support: Profile S ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera FIRMWARE RELEASE NOTE ===== Products affected: P1405-LE Mk II Release date: 2016-08-16 Release type: Production Firmware version: 6. 2 File name: M3024-L_5_50_5_2. Follow the instructions given in the User Manual, at AXIS Firmware 5. Firmware Release Notes PCI 16 Axis SERCOS interfaceTM Card Firmware v13. Corrected Anomalies in This Release. FIRMWARE RELEASE NOTE ====================== Products affected: AXIS M3005 Network Camera Release date: 2021-11-23 Release type: Production Firmware version: 5. 3 File name: M1011_5_20_3. 3 ONVIF 6. 1 ----- Features in 10. 1:L1 If upgrading from 1. 1 Firmware track: Secure Entry Preceding release: 11. FIRMWARE RELEASE NOTE ===== Products affected: T8705 Release date: 2023-03-07 Release type: Production Firmware version: 6. 장치에서AXIS OS 버전을업그레이드할때마다, 장치가암호화서명확인을통해 FIRMWARE RELEASE NOTE ===== Products affected: AXIS A1601 Release date: 2023-04-27 Release type: Production Firmware version: 10. FIRMWARE RELEASE NOTES ===== Products affected: AXIS Q6045-E Mk II Release date: 2017-04-27 Release type: Production Firmware version: 6. 1 Firmware track: VAPIX Preceding release: 1. 2 File name: P5624-E-MkII_6. 83. 5 ----- This is the LTS-2018 track. 55. 4 ----- This is the LTS-2018 track. 6 Preceding release: 8. 51 FIRMWARE RELEASE NOTES ===== Products affected: P1405-LE Mk II Release date: 2016-11-28 Release type: Production Firmware version: 6. 1 and later, as well as LTS track firmware 9. 7. 2520Firmware query and firmware upgrade functionality is not supported. Upgrade the firmware according to the instructions given in howtoupgrade. 7 File name: M3025-VE_5_50_5_7. 8 FIRMWARE RELEASE NOTE ===== Products affected: T8705 Release date: 2022-07-04 Release type: Production [Note: Maybe something else than production like "Maintenance" as I would not recommend running this firmware longterm and only for the purpose of updating to 6. For information on new and upcoming AXIS OS releases, visit the AXIS OS portal. Improved behaviour with MS200. The Synergis Softwire app and the Axis firmware are distributed in the same firmware file. Devices are placed on active, long-term support (LTS), or product-specific support (PSS) tracks. 1 AMC version: 5. 1:F9 Prepared support for signed firmware to increase overall cyber security level. 8 ----- Upgrade instructions ===== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. 14 Preceding release: 9. 6 and 0. It also significantly improves the program’s UI, greatly enhances usability, and supports HealthPro Bridge DB backup and recovery. Note Check the release notes for details for each product. This release corrects the following anomalies. bin The firmware can be upgraded using Axis Camera Management, HTTP or FTP. 0] Firmware version: 5. 019 (released 6/2016) Catalog Number 1769-L35E (series A) An axis can move in the wrong direction in the following conditions: The Motion Axis Jog (MAJ) instruction faceplate of an axis is being merged is configured so that Merge = Enabled and Merge Speed = Current. 2520Previous version: 2. 0-1 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management 3. Note that available functionality varies depending on camera and encoder model. 2 Preceding release: 10. 5 Preceding release: 10. 45. 1 ----- UPGRADE INSTRUCTIONS ===== 1. Adjusting the eye axis can help you find the most comfortable viewing distance and improve comfort when wearing XR Glasses for extended periods. 12 ----- This is the LTS-2020 track. Please follow the instructions from the user AXIS Communications AB AXIS OS Release Notes. 50. 6 . 30. Welcome to the AXIS OS Release Notes, a repository for the release notes about new features, security and other improvements for different AXIS OS tracks. 5 FIRMWARE RELEASE NOTES ===== Products affected: AXIS M1011-W Network Camera Release date: 2011-09-08 Release type: Production Firmware version: 5. General information. FIRMWARE RELEASE NOTE ===== Products affected: Q7401 Release date: 2021-11-23 Release type: Production Firmware version: 5. Kinetix 5700 Dual-axis Module Firmware Revision 13. Download FW to local computer. Please follow the Either all at a time using ADM or straight after each other using web interface or FTP. For more help choosing the most suitable AXIS OS track per system setup, please visit the Suggested track section on AXIS OS Portal. 2 since 6. 3, and not the last minor revision, 16. 5, you should view all of the information for FIRMWARE RELEASE NOTE ===== Products affected: M3045-V Release date: 2022-07-13 Release type: Production Firmware version: 8. 12 ----- This is the LTS-2016 track. 5 FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8105-E Release date: 2022-05-31 Release type: Production Firmware version: 1. Features. This release includes the following system features. 2 ----- Upgrade instructions ===== Upgrade the firmware according to the instructions given in howtoupgrade. 6 Preceding FIRMWARE RELEASE NOTE ===== Products affected: AXIS C1310-E Release date: 2022-10-21 Release type: Production Firmware version: 10. The entire cluster always needs to be on the same Firmware. 3 Releasedate:2025-02-24-2025-02-26 Features FIRMWARE RELEASE NOTE ===== Products affected: P3245-LV / P3245-LVE / P3245-LVE 22mm/ P3247-LV / P3247-LVE / P3248-LV / P3248-LVE Release date: 2021-04-28 Release type: Production Firmware version: 10. Version 1. 001 (released 7/2022). 2467-----CHANGES IN VERSION 2. Skip to main content Contact us. 50, compared to FIRMWARE RELEASE NOTE ===== Products affected: P1455-LE Release date: 2021-02-24 Release type: Production Firmware version: 10. (The gravity does not effect the two axis normally used for the tilt detection making it sensitive to noise) Supported AXIS VAPIX API Image Resolutions for AXIS A8105-E ===== Resolution Exceptions ===== ===== 1920x1200 1920x1080 1600x1200 1400x1050 960x1280 1280x960 1280x800 720x1280 1280x720 1024x768 1024x640 600x800 800x600 854x480 800x500 FIRMWARE RELEASE NOTE ===== Products affected: AXIS T8524 PoE+ Network Switch Release date: 2023-06-21 Release type: Production Firmware version: 6. 004 Corrected Anomalies. 3 File name: M3203_5_50_3_3. 1 File name: P5624-E-MkII_7_20_1. Supported AXIS VAPIX API Image Resolutions for AXIS P1343 ===== Resolution Exceptions ===== ===== 800x600 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 176x144 160x120 160x100 160x90 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 384x288 1) 704x240 1) 352x288 1) 352x240 1) 240x135 1 FIRMWARE RELEASE NOTE ===== Products affected: AXIS M3113/M3114/P8513/P8514 Network Camera Release date: 2021-11-23 Release type: Production Firmware version: 5. 12Version: 2. 3 Releasedate:2025-02-24-2025-02-26 Features Check the release notes for details for each product. x and AXIS Video Motion Detection 2. Kinetix 6500 Servo Drives Firmware Revision 3. 47. 3 File name: P1353_6_50_1_3. The Z and Rz axes are decoupled in firmware, so that you will not notice Z movement due to rotation on Rz when you make a move on the source coordinate system. 4. 3805 File name: T8524_6_54_3805. Release notes. 9 and later. Resolved the issue of exported CSV FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q6032-E PTZ Dome Network Camera Release date: 2018-04-11 Release type: Production Firmware version: 5. Logix Firmware Product support for AXIS C1310-E Network Horn Speaker. FIRMWARE RELEASE NOTE ===== Products affected: P1455-LE Release date: 2024-01-01 Release type: Production Firmware version: 10. 35. 1:F1 The possibility to edit scripts in camera has been disabled per default in order to increase minimum cyber security level. com NOTE ===== - AXIS P3247-LV/-LVE and AXIS P3248-LV/-LVE Products with HardwareID 956. 154 (released 3/2020) it is necessary to use the same firmware revision (1. 10 ----- This is the LTS-2020 track. FIRMWARE RELEASE NOTES ===== Products affected: AXIS P1204, AXIS P1214, AXIS P1214-E, AXIS P1224-E, AXIS P8524, AXIS M2014-E and P12/M20 Release date: 2015-11-12 Release type: Production Firmware version: 5. 2 File name: S22_switch_1_1_2. NetCloud OS (NCOS) has a monthly release schedule with each release possibly including new features, UI & usability changes, defect fixes, or security fixes. The typical uses are when you: Firmware Revision 15 Release Notes Author: Rockwell Automation Keywords: 1756-M03SE, 1756-M08SE, 1756-M16SE Created Date: 11/16/2006 5:34:50 PM FIRMWARE RELEASE NOTES ===== Products affected: AXIS 221 Network Camera Release date: 2010-04-23 Release type: Production Firmware version: 4. AXISOSreleasenotes AXISOS12 AXISOS12 GotoProductsonactivetrack-AXISOS12onpage76foralistofproductsonthistrack. 006 (released 12/2019). 13 Preceding release: 6. Kinetix 350 Servo Drives FIRMWARE RELEASE NOTES ===== Products affected: AXIS P1311 Network Camera Release date: 2011-03-31 Release type: Production Firmware version: 5. Release notes of patches are placed in their respective major release pages. FIRMWARE RELEASE NOTE ===== Products affected: A8207-VE MK II/A8207-VE Release date: 2021-11-22 Release type: Production Firmware version: 10. 6 File name: M3204_5_50_3_6. 005 (released 3/2022). Before upgrading to AXIS OS 12, please review the breaking changes. 80 Overview . 4 Preceding release: 10. 0 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS version FIRMWARE RELEASE NOTES ===== Products affected: AXIS M3203/-V/M3204/-V Release date: 2017-02-20 Release type: Production Firmware version: 5. 80: P1405-E/-LE . 001 (released 10/2020) Features. 2 Release Notes Kinetix 6500 Multi-axis Servo Drives; 2094-EN02D-M01-S0 & 2094-EN02D-M01-S1 These release notes describe version information for Kinetix 6500 (2094), version 3. 13 Preceding release: 1. Please follow the instructions from the user's manual, the web page at FIRMWARE RELEASE NOTES ===== Products affected: AXIS M3045-V Release date: 2017-10-13 Release type: Production Firmware version: 7. 1 ----- Upgrade instructions ===== NOTE 1: Firmware image version has been updated in earlier FW version, meaning that upgrade to this release can only be done from FW version 1. Signal strength: Select the distance for Bluetooth module communication with FIRMWARE RELEASE NOTES ===== Products affected: AXIS M3024-L Network Camera Release date: 2015-03-25 Release type: Production Firmware version: 5. Products shipped from Axis to the original purchaser after the product discontinuation date may come with a limited hardware warranty. com NOTE ===== Products with HardwareID 90B, 90C and 90D only supports active track firmware 10. Mixing firmware revisions has been known to cause nuisance faults, for example, E75 during ring phase-up. Kinetix 5700 Dual-axis Modules Firmware Revision 9. 13808. FIRMWARE RELEASE NOTE ===== Products affected: AXIS C8033 Release date: 2021-12-03 Release type: Production Firmware version: 10. Release Notes Drives Kinetix 5700 Servo System Dual-axis Modules; (2198-Dxxx-ERS3) (series B) These release notes describe version information for Kinetix 5700 Dual-axis Module, version 13. 10. 1 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired FIRMWARE RELEASE NOTE ===== Products affected: AXIS P5534-E PTZ Dome Network Camera Release date: 2020-12-03 Release type: Production Firmware version: 5. Corrections in 6. Download. 11 Releasedate: 2024-06-26 FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8004-VE Release date: 2022-05-31 Release type: Production Firmware version: 1. 0 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an FIRMWARE RELEASE NOTE ===== Products affected: AXIS P1347/P1347-E Network Camera Release date: 2020-12-03 Release type: Production Firmware version: 5. A1610 user manual. My Axis Software Bill of Materials Software licenses Release notes. 76. 49 File name: 221_449. 12 AXIS OS offers different tracks depending on your needs. The product is saving a restore point every time the firmware is updated, allowing the user to rollback to a previous firmware and its configuration. FIRMWARE RELEASE NOTE ===== Products affected: M3104-L/-LVE/M3105-L/-LVE Release date: 2020-12-18 Release type: Production Firmware version: 9. 3. 6. 1 File name: 211_420_1. It is purpose-built to live up to the most important criteria for network devices: high standards for cybersecurity, ease of integration, quality, and Release Notes Drives Kinetix 5700 Servo System Dual-axis Modules; (2198-Dxxx-ERS3) Version 13. 12 Preceding FIRMWARE RELEASE NOTE ===== Products affected: Q6100-E Release date: 2021-06-16 Release type: Production Firmware version: 10. 24 - 20 November, 2024 Updated: Optimizations FIRMWARE RELEASE NOTE ===== Products affected: M5525-E Release date: 2022-05-06 Release type: Production Firmware version: 8. Contact us. 0, FIRMWARE RELEASE NOTE ===== Products affected: AXIS P1346/P1346-E Network Camera Release date: 2019-05-13 Release type: Production Firmware version: 5. Supported Devices: AXIS video products with firmware versions 4. 7 Preceding release: 1. Feature First Identified as of Firmware Revision 4. Upgrade recommendations ===== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks FIRMWARE RELEASE NOTES ===== Products affected: AXIS 211 Network Camera Release date: 2005-05-10 Release type: Service Release Firmware version: 4. 2. 8 Preceding release: 6. FIRMWARE RELEASE NOTES ===== Products affected: AXIS 213 PTZ Network Camera Release date: 2007-10-05 Release type: Service Firmware version: 4. FIRMWARE RELEASE NOTE ===== Products affected: P1455-LE 29 mm Release date: 2021-06-16 Release type: Production Firmware version: 10. 1 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. 7 Preceding release: 8. 3 Preceding release FIRMWARE RELEASE NOTES ===== Products affected: AXIS P3353 and AXIS P3354 Release date: 2016-07-15 Release type: Production Firmware version: 6. Version 11. 5 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management 2. Log in. 003 (released 8/2018). 5 Preceding release: 8. Go to to read more about scheduled and current AXIS Upgrade the firmware according to the instructions given in howtoupgrade. . Product support for AXIS P3265-LVE Dome Camera. 125 or later) across all drive modules. 5 at github. Compatibility. 1 File name: M3007_6. 13 Preceding release: 9. Net library, LabVIEW instrument driver) Release of EPOS Linux Library 6. bin Preceding release: N/A AMC version: 5. The behavior for AXIS Cross Line Detection 1. 8. 12. These release notes describe version information for Kinetix 5700 Single-axis Module, version 11. bin Preceding Known Bugs/Limitations ===== 1. Fixed the crash issue when exporting to CSV files. 3 AXISOSreleasenotes AXISOS12 AXISOS12 GotoProductsonactivetrack-AXISOS12onpage76foralistofproductsonthistrack. 90 Firmware FIRMWARE RELEASE NOTES ===== Products affected: AXIS M3044-V Release date: 2017-10-13 Release type: Production Firmware version: 7. 30 or higher except AXIS 206M and AXIS 206W. Please FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8105-E Release date: 2023-12-21 Release type: Production Firmware version: 1. 20 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using HTTP or FTP. 2 release includes all corrections in 6. 1 ===== AXIS Audio Manager Edge features ----- 10. 1:F8 AXIS Video Motion Detection 4. Catalog Numbers 2198-D006-ERS3, 2198-D012-ERS3, 2198-D020-ERS3, 2198-D032-ERS3, 2198-D057-ERS3 FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q3709-PVE Network Camera Release date: 2022-01-17 Release type: Production Firmware version: 5. 6 File name: P12M20_5_50_6. Review all firmware release notes, starting with the original firmware revision through the new firmware revision, to identify any changes that impact the safety-related Make sure that AXIS Video Motion Detection is running: Go to Settings > Apps > AXIS Video Motion Detection. 2 active track release is available here. 7 Minimum AXIS OS version: 10. Catalog Numbers: 2198-D006-ERS3, 2198-D012-ERS3, 2198-D020-ERS3, 2198-D032-ERS3, 2198-D057-ERS3. FIRMWARE RELEASE NOTE ===== Products affected: M1054 Release date: 2021-11-23 Release type: Production Firmware version: 5. 1 Axis Firmware 5. 9. Please follow the instructions from the user's manual, the web page at AXIS Firmware 5. 4 File name: Q6032-E_5_41_4. 5 File name: T8705_5_1_8_5. 3 and later, as well as on LTS firmware track 9. 97. Feature / update Function Value Added support for trouble shooting in the web interface In addition to the existing possibility to download network trace file for RELEASE NOTES * It applies to AXIS S3008, AXIS S3008 MK II and AXIS S3016 network recorders. Please follow the AXISOSreleasenotes AXISOS12 AXISOS12 GotoProductsonactivetrack-AXISOS12onpage76foralistofproductsonthistrack. 1 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS FIRMWARE RELEASE NOTES ===== Products affected: AXIS P8221 Network I/O Audio Module Release date: 2021-08-10 Release type: Production Firmware version: 5. FIRMWARE RELEASE NOTE ===== Products affected: P7214 Release date: 2019-08-16 Release type: Production Firmware version: 5. Please follow the instructions from the FIRMWARE RELEASE NOTES ===== Products affected: AXIS 216FD Network Camera Release date: 2015-03-27 Release type: Production Firmware version: 4. Please follow the FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q6045-E Mk II Release date: 2023-02-02 Release type: Production Firmware version: 6. FIRMWARE RELEASE NOTE ===== Products affected: AXIS M3004 Network Camera Release date: 2021-11-23 Release type: Production Firmware version: 5. 006 Corrected Product support for AXIS A1601 Network Door Controller. FIRMWARE RELEASE NOTE ===== Products affected: P5512-E Release date: 2017-12-07 Release type: Production Firmware version: 5. For example if the current version is 7 FIRMWARE RELEASE NOTES ===== Products affected: AXIS 241S Video Server Release date: 2005-12-28 Release type: Service Firmware version: 4. Check the release notes for details for each product. 0 to later firmware, IO settings done on port 5 and port 6 are not migrated to port 13 and port 14 (which are the new names for these physical ports in 1. 2 RELEASE DATE: 3-13-2025. 1 File name: Q6155-E_7. 7-1 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management, FIRMWARE RELEASE NOTES ===== Products affected: AXIS P5514 Release date: 2016-10-31 Release type: Production Firmware version: 6. 7 FIRMWARE RELEASE NOTES ===== Products affected: AXIS P5624-E Mk II Release date: 2017-04-18 Release type: Production Firmware version: 6. 10; See Firmware releases for all supported products. 3 FIRMWARE RELEASE NOTE ===== Products affected: AXIS M3024-L Network Camera Release date: 2021-11-23 Release type: Production Firmware version: 5. 3 File name: P3304_5_50_5_3. axis. Upgrade recommendations ===== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks FIRMWARE RELEASE NOTE ===== Products affected: Q6135-LE Release date: 2021-06-04 Release type: Production Firmware version: 10. 6 Preceding FIRMWARE RELEASE NOTES ===== Products affected: AXIS M1011 Network Camera Release date: 2017-06-08 Release type: Production Firmware version: 5. 4 Preceding release: 1. 4 is now pre-installed. 1:C16 Improved camera stability when using liblicensekey. AXIS OS is the Linux-based Find the right software (previously firmware) releases by searching for your device. Axis launches a new active track FIRMWARE RELEASE NOTE ===== Products affected: AXIS M3007-P/PV Release date: 2016-07-07 Release type: Production Firmware version: 6. Make sure you have set up the application according to your needs. 1 File name: Q6055-E_6_25_1_1. 5 FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q6155-E Release date: 2017-09-19 Release type: Production Firmware version: 7. 3 Preceding release: 10. Feature First Identified as of Firmware Revision 13. The changes in this release are: When multiple motors are due to step, generate all the step pulses simultaneously; Added support for multiple drivers for a single axis (M584) FIRMWARE RELEASE NOTE ===== Products affected: M3064-V / M3065-V / M3066-V / M3075-V Release date: 2021-06-04 Release type: Production Firmware version: 10. bin Preceding release: 7. Axis Firmware 6. Mōvi Pro and Carbon SL4 Guide; Camera Support Software Release Notes. NOTE ===== For This document describes new and modified capabilities in the 5. Please follow the FIRMWARE RELEASE NOTES ===== Products affected: AXIS M3203/-V/M3204/-V Release date: 2016-06-27 Release type: Production Firmware version: 5. 90 This section describes new and modified capabilities in the 5. 0 Hardware Support for EPOS4 50/5 Firmware Release of EPOS4 Firmware 0x0120 FIRMWARE RELEASE NOTE ====================== Products affected: AXIS Q6000-E and AXIS Q6000-E Mk II Release date: 2024-01-10 Release type: Production Firmware version Archive - AXIS OS Release Notes AXIS OS 11 AXIS OS 11 Inthissection,youcanfindreleasenotesontheactivetrackpriortoAXISOS12. The context menu contains: Module information: Shows the Bluetooth reader name, module type, board type, assembly version, application version, and bootloader version. 60 Firmware Release. FIRMWARE RELEASE NOTES ===== Products affected: AXIS M3004 Network Camera Release date: 2015-03-25 Release type: Production Firmware version: 5. 001 (released 7/2022) Catalog Number Kinetix 5100 (2198-Exxxx-ERS) These release notes describe version information for Kinetix 5100 (2198-Exxxx-ERS), version 4. FIRMWARE RELEASE NOTE ===== Products affected: AXIS P5624-E-MkII Release date: 2017-06-15 Release type: Production Firmware version: 7. Please follow the FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q6035-E PTZ Dome Network Camera Release date: 2020-11-04 Release type: Production Firmware version: 5. Not applicable; RESOLVED ISSUES. 1:F1 The leadership role, configuration and stored content of your AXIS Audio Manager Edge FIRMWARE RELEASE NOTE ===== Products affected: AXIS M3005 Network Camera Release date: 2021-11-23 Release type: Production Firmware version: 5. Reduced FIRMWARE RELEASE NOTE ===== Products affected: Q6075-E Release date: 2021-06-21 Release type: Production Firmware version: 10. AXIS OS 12. Please note that available functionality varies depending on camera and encoder model. 25. L6 The AXIS Media Control may stop displaying the MPEG-4 Welcome to the AXIS OS Knowledge base, a comprehensive repository designed to be the go-to resource for technical information about AXIS OS. 1 AMC version: 6. 1:C17 - Affects AXIS P1364 AXIS P1365 Mk II AXIS Q1635 - Support for T99Axx via APTP uploadable PTZ drivers. Please follow the Product support for AXIS S3008 Recorder. Locate: Click to search for connected modules. 3 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the To verify that a defined part of the image contains enough pixels to, for example, recognize the face of a person, you can use the pixel counter. bin Preceding release: None ----- This firmware is not affected by the critical security vulnerability (CVE-2016-AXIS-075 Remote format String) announced June 29, 2016. txt, which is included in the firmware folder or according to instructions at Module, Revision 16 Release Notes, publication 1756-RN640, in addition to the content of these release notes. Also, we are only including the new products in the release notes, you can still find the complete list in compatibility information. 004 (released 3/2020). Please follow the instructions from the user's Release notes of all AOS-8 versions starting from 8. 7 ore fa — Added support for controlling PTZ using the VISCA protocol over IP and RS232 for AXIS V5925. 119. txt, which is included in the firmware folder or at the firmware portal at https://www. 4 AMC version: 6. Module name: Enter a module name for the input and output specification. Select a major version and find the corresponding patch release notes. 12 Preceding release: 1. P1428-E FIRMWARE RELEASE NOTE ===== Products affected: AXIS P1346/P1346-E Network Camera Release date: 2021-04-15 Release type: Production Firmware version: 5. Please follow the AXISOS보안강화가이드 기본보호 Signed Firmware CSC#2:소프트웨어자산의인벤토리및제어 AXIS OS는버전9. The long-term support (LTS) tracks maximize stability and focus on keeping a well-integrated 3rd party system by providing bug fixes and security patches. FIRMWARE RELEASE NOTES ===== Products affected: AXIS P3304 Fixed Dome Network Camera Release date: 2017-10-02 Release type: Production Firmware version: 5. 2 File name: T8705_6_0_2. A1610-B user manual. 3 Releasedate:2025-02-24-2025-02-26 Features AXIS Firmware Overview This document describes new and modified capabilities in the Axis Firmware Releases. AXIS OS 11. Note that the Z Offset value will reset if using the Align build platform calibration tool. FIRMWARE RELEASE NOTE ===== Products affected: AXIS C1310-E Release date: 2021-12-03 Release type: Production Firmware version: 10. Where applicable: find software, firmware, manuals, datasheets, technical specifications and other resources here. 3 (LTS 2016), 8. Optimized Volume Adjustment Granularity These release notes describe version information for Kinetix 5700 Dual-axis Module, version 11. Follow the instructions given in the User Manual FIRMWARE RELEASE NOTE ===== Products affected: Q1700-LE Release date: 2021-04-28 Release type: Production Firmware version: 10. If your controller , for example, is at revision 16. 73. 3 Releasedate:2025-02-24 Check the release notes for details for each product. bin Preceding release: 4. Earlier releases for AXIS C1310-E Network Horn Speaker. 1:F7 AXIS Motion Guard and Fence Guard 2. Please follow the instructions from the user's Release Notes CompactLogix L35E controller Version 20. are FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q6034-E PTZ Dome Network Camera Release date: 2021-11-23 Release type: Production Firmware version: 5. 5 ----- This is the LTS-2016 track. 51. 1). 70 Firmware Release. 13699. 003 (released 1/2020). 60 Overview This document describes new and modified capabilities in the 5. 50 Firmware Release. 004 (released 5/2021). bin Preceding release: 1. 6 Preceding release: 5. Kinetix 5700 Single-axis Module FIRMWARE RELEASE NOTE ===== Products affected: AXIS M1025 Network Camera Release date: 2021-11-23 Release type: Production Firmware version: 5. 7 ----- This is the LTS-2016 track. 30 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using HTTP or FTP. 6 Preceding FIRMWARE RELEASE NOTE ===== Products affected: AXIS C1310-E Release date: 2022-05-26 Release type: Production Firmware version: 10. x only supports firmware 10. 3 Releasedate:2025-02-24-2025-02-26 Features For highlights and detailed release notes on AXIS OS releases, visit AXIS OS Release Notes. FIRMWARE RELEASE NOTE ===== Products affected: AXIS A1601 Release date: 2022-03-17 Release type: Production Firmware version: 1. 1 Firmware track: Secure entry Preceding release: N/A ----- Upgrade recommendations ===== When updating the device from the A1601 Active track, it is important to factory default the device together with the firmware upgrade due AXIS OS allows flexible, robust integration with all kinds of systems: Richly documented open standards like Axis VAPIX, our own cutting-edge API, and the ONVIF API make Axis OS compatible with a wide variety of VMS. Upgrade Inhibit an axis Inhibit an axis when you want to block the controller from using the axis but let the other axes run. 2 AMC version: 5. 1 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management 2. 1 File name: 213_4_35_1. 1:F7 Added support for uploading custom firmware certificates in the web- interface under Settings -> System -> Security in order to allow the Axis product to accept AXIS developer firmware during firmware upgrade. Upgrade recommendations ===== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks Release Notes Kinetix 350 Multi-axis Servo Drives (2097-Vxxx) Version 2. 2 File name: Q6115-E_6. 2 File name: P1405-LE-MkII_6. Please follow the Product support for AXIS P3265-LV Dome Camera. bin Preceding release: 6. 2 This page contains release notes on the latest firmware updates so that you can decide whether or not to have your product updated. Please follow the instructions from FIRMWARE RELEASE NOTES ===== Products affected: AXIS Q6115-E Release date: 2017-10-12 Release type: Production Firmware version: 6. 80 Firmware Release. x version are available here. bin Preceding release: 5. 3 File name: P12M20_5_40_12_3. 9 ----- Upgrade instructions ===== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. com (follow the link and then press Raw to download it). 6 Release Note Cat. FIRMWARE RELEASE NOTE ===== Products affected: P12 MK II Release date: 2022-09-07 Release type: Production Firmware version: 9. 6 Preceding release: 1. Release notes for the LTS tracks are available from 6. 0 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired This document describes new and modified capabilities in the 5. txt, which is included in the firmware folder or according to FIRMWARE RELEASE NOTES ===== Products affected: AXIS 213 PTZ Network Camera Release date: 2007-10-05 Release type: Service Firmware version: 4. 70. 89. 2 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS version These release notes describe version information for Kinetix 5700 Dual-axis Module, version 9. 84. 8 ----- This is the LTS-2020 track. On the "General" ->"Firmware Either all at a time using ADM or straight after each other using web interface or FTP. 10 Firmware Release. 2 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. FIRMWARE RELEASE NOTE ===== Products affected: T8705 Release date: 2019-12-17 Release type: Production Firmware version: 5. FIRMWARE RELEASE NOTES ===== Products affected: AXIS M3025-VE Network Camera Release date: 2016-07-08 Release type: Production Firmware version: 5. 0 Preceding release: 10. 11 Releasedate: 2024-06-26 Axis Studio Release Notes-----Release date: 2024. 1:F3 AXIS Fence Guard is now pre-installed. Following products is released in 5. 2 Release of EPOS Windows DLL 6. 6 Preceding AXIS OS 12. FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8004-VE Release date: 2024-07-10 Release type: Production Firmware version: 1. 0 (including . 65. 1:F4 Support for Firmware Recovery under Settings -> System -> Maintenance. Kinetix 5700 Dual-axis Module Firmware Revision 11. AXIS OS FIRMWARE RELEASE NOTE ===== Products affected: P3245-V / P3245-VE Release date: 2021-04-28 Release type: Production Firmware version: 10. 2 File name: M3004_5_50_5_2. 6 of the PCI 16 Axis SERCOS interfaceTM card. EPOS Setup «Release Notes» CCMC | 2022-05 | rel10569 5 Edition 29 (2017-05) Features Software Release of EPOS Studio 3. FIRMWARE RELEASE NOTE ===== Products affected: AXIS A8105-E Release date: 2021-01-13 Release type: Production Firmware version: 1. This document describes new and modified capabilities in the 5. 113. 70: AXIS M3006-V AXIS M3007 AXIS M3026-VE AXIS M3027-PVE AXIS P1357/-E AXIS P3367/-V/-VE AXIS Q6042 AXIS Q6042-C AXIS Q6042-E AXIS Q6042-S AXIS Q6044 AXIS Q6044-C FIRMWARE RELEASE NOTE ===== Products affected: M3115-LVE / M3116-LVE Release date: 2021-11-26 Release type: Production Firmware version: 10. AXIS Network Door Controllers (A1601, A1610, A1210): firmware versions 11. Bug where the previous version was still displayed when updating a WAVE server's child camera firmware in HealthPro, and the previous IP address was still displayed in HealthPro when changing the I have released new firmware for the Duet 0. FIRMWARE RELEASE NOTES ===== Products affected: AXIS P1353/-E and AXIS P1354/-E Release date: 2017-10-02 Release type: Production Firmware version: 6. No. Added Z-Axis Fine Tuning. 001 Features. When you apply the firmware file, you upgrade all FIRMWARE RELEASE NOTE ===== Products affected: A8207-VE MK II/A8207-VE Release date: 2021-10-08 Release type: Production Firmware version: 10. 75. Catalog Numbers: 2198-Exxxx FIRMWARE RELEASE NOTE ===== Products affected: P1435-E/LE Release date: 2022-02-16 Release type: Production Firmware version: 9. FIRMWARE RELEASE NOTE ===== Products affected: P5512-E Release date: 2020-11-04 Release type: Production Firmware version: 5. 10 Preceding release: 9. Glossary. Follow the instructions given in the User Manual, at http FIRMWARE RELEASE NOTE ===== Products affected: P3224-LV MK II/-LVE MK II/P3225-LV MK II/-LVE MK II Release date: 2022-07-13 Release type: Production Firmware version: 9. 0. 8. 11 Preceding release: 9. FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q6035-E PTZ Dome Network Camera Release date: 2019-08-16 Release type: Production Firmware version: 5. 80. 5. Please follow the instructions from the user's Firmware Updates; Software Release Notes; Technical Drawings and CAD. 3802 ----- Upgrade instructions ===== Upgrade the firmware according to the instructions given in the user manual. 71. txt, which is included in the firmware folder or according to instructions at https://www. 6 File name: 216FD_4_47_6. 1 (LTS 2018) and 9. 212_TTA ----- Upgrade recommendations ===== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks before proceeding. 001 . 1 ----- Upgrade instructions ===== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. 2 AMC version: 6. 1 Preceding release: 10. Please follow (The gravity does not effect the two axis normally used for the tilt detection making it sensitive to noise) Supported AXIS VAPIX API Image Resolutions for AXIS A8105-E ===== Resolution Exceptions ===== ===== 1920x1200 1920x1080 1600x1200 1400x1050 960x1280 1280x960 1280x800 720x1280 1280x720 1024x768 1024x640 600x800 800x600 854x480 800x500 Release Notes Kinetix 5100 Single Axis Drives; (2198-Exxxx-ERS) Version 4. General information 1 FIRMWARE RELEASE NOTE ===== Products affected: AXIS P5534-E PTZ Dome Network Camera Release date: 2021-11-15 Release type: Production Firmware version: 5. 5-1 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. 7. 0 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS version. 9. 6 AXISOSreleasenotes AXISOS12 AXISOS12 GotoProductsonactivetrack-AXISOS12onpage76foralistofproductsonthistrack. 1 File name: M3044-V_7_30_1_1. Upgrade recommendations ===== If you need to step up your firmware several steps, it is recommended to do FIRMWARE RELEASE NOTE ===== Products affected: AXIS Q6055-E Release date: 2016-05-13 Release type: Production Firmware version: 6. 1 ===== 6. 2 File name: T8705_5_1_8_2. Upgrade recommendations ===== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks FIRMWARE RELEASE NOTES ===== Products affected: AXIS P1204, P1214, P1214-E, P1224-E, P8524, M2014-E and P12/M20 Network camera Release date: 2013-04-16 Release type: Production Firmware version: 5. 2 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS version. 1 ----- Upgrade recommendations ===== Upgrade the firmware according to the instructions given in howtoupgrade. If you need help, see the user manual for AXIS Video Motion Detection 4. 5 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. 16 Preceding 6. Follow the instructions given in the User Manual FIRMWARE RELEASE NOTE ====================== Products affected: AXIS M3027-PVE Release date: 2024-01-10 Release type: Production Firmware version: 6. 3 ONVIF Profiles: Welcome to the Archive - AXIS OS Release Notes, a repository for the release notes about features, security and other improvements for old and archived AXIS OS versions. Name. 8-1 ----- UPGRADE INSTRUCTIONS ===== The firmware can Product support for AXIS I8016-LVE Network Video Intercom. FIRMWARE RELEASE NOTE ===== Products affected: P3245-LV / P3248-LVE / P3245-LVE / P3247-LV / P3247-LVE / P3248-LV Release date: 2021-11-29 Release type: Production Firmware version: 10. This section describes new and modified capabilities in the 6. 1 or higher. 1. 1 and later. Subscribe to the AXIS OS YouTube playlist to conveniently stay updated and informed. FIRMWARE RELEASE NOTE ===== Products affected: M4308-PLE Release date: 2021-11-22 Release type: Production Firmware version: 10. 0331. 2 File name: A8004_1_65_2. 1 File name: M3045-V_7_30_1_1. 171. 1 ----- Upgrade recommendations ===== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired Product support for AXIS F9111 Main Unit. 6 ----- This is the LTS-2016 track. bin Preceding release: None ----- Upgrade instructions ===== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Please follow FIRMWARE RELEASE NOTE ===== Products affected: P12 MK II Release date: 2022-10-10 Release type: Production Firmware version: 8. txt, which is included in the firmware folder or according to Find the right software (previously firmware) releases by searching for your device. 6. 1 File name: Q6045-E-MkII_6_50_1_1. 2 or higher. Breaking changes. 005 Product support for AXIS Q6125-LE PTZ Network Camera. 5 Preceding release: 1. 10 File name: P5512-E_5_50_4_10. * Added the possibility to view release notes in an external browser Rockwell Automation Publication 2097-RN004B-EN-P - June 2014 2 Kinetix 350 Single-axis EtherNet/IP Servo Drives, Firmware Revisions 1. 1 File name: P5514_6_40_1_1. 2 Preceding release: 5. 3 File name: P3353_6_10_1_3. x releases as below. HTTP ==== 1. 7-1 Onvif support: Profile S ----- UPGRADE INSTRUCTIONS FIRMWARE RELEASE NOTE ===== Products affected: P3719-PLE Release date: 2022-09-07 Release type: Production Firmware version: 9. You can enter the eye axis angle adjustment mode by TRIPLE-CLICK the Mode button (short button), then click the +/- adjustment button to adjust the eye axis. 1-1 ----- UPGRADE INSTRUCTIONS ===== The firmware can be upgraded using Axis Camera Management 2. 5 File name: T8705_6_0_5. To use this firmware version, update your system as follows: Enhancements: The following enhancements have been made to the firmware: FIRMWARE RELEASE NOTES ===== Products affected: AXIS 2208, AXIS S2212, AXIS S2216, AXIS S2224 Release date: 2022-05-02 Release type: Production Firmware version: 1. SPDIF. In the active track, we continue to add features, improve cybersecurity This release includes AXIS cameras and WAVE server integration, in line with HealthPro’s expanded device support plan.
fkiyg unkx lecswif uumra mxcgor rdydc jmacy aep ufvpkf uxfsv oypuq oqko tfyif ijjzwm pbuk